SB 763
AN ACT relating to the renewal and review of standard permits for certain
89th Regular Session
Jan 14, 2025 - Jun 2, 2025 • Session ended
Awaiting Committee Assignment
Bill filed, pending referral to Senate committee
Committee
Not yet assigned
Fiscal Note
Not available
What This Bill Does
relating to the renewal and review of standard permits for certain
Subject Areas
Bill Text
relating to the renewal and review of standard permits for certain BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF TEXAS: SECTION 1. Section 382.05195, Health and Safety Code, is amended by adding Subsection (e-1) and amending Subsection (k) to (e-1) This subsection applies only to a standard permit issued under this section that authorizes the operation of a permanent concrete plant that performs wet batching, dry batching, or central mixing, as defined by the commission. The commission shall at least once every six years conduct a protectiveness review of the permit regarding the operation of a permanent concrete plant described by this subsection, including by reviewing available background concentrations of air pollutants. If the commission amends the permit after a protectiveness review, the commission shall allow facilities authorized to emit air contaminants under the permit as it read before the amendment to continue to operate until a date provided by the commission under Subsection (f) that provides facility operators a reasonable amount of time to comply with the amended permit. Each authorization to use the permit is subject to review at least once every six years to determine whether the authority to operate the facility authorized by the permit (k) An application for an authorization to use [the issuance of] a standard permit under this section for a concrete plant that performs wet batching, dry batching, or central mixing, including a permanent, temporary, or specialty concrete batch plant, as defined by the commission, must include a plot plan that clearly shows: (3) all property lines, emission points, buildings, tanks, and process vessels and other process equipment in the area in which the facility will be located; (4) at least two benchmark locations in the area in which the facility will be located; and (5) if the permit requires a distance, setback, or buffer from other property or structures as a condition of the permit, whether the required distance or setback will be met. SECTION 2. Section 382.05198, Health and Safety Code, is amended by amending Subsection (c) and adding Subsection (d) to (c) An application for an authorization to use [the issuance of] a standard permit under this section must include a plot plan that meets the requirements of Section 382.05195(k). (d) The commission shall at least once every six years conduct a protectiveness review of a standard permit issued under this section, including by reviewing available background concentrations of air pollutants. If the commission amends the permit after a protectiveness review, the commission shall allow facilities authorized to emit air contaminants under the permit as it read before the amendment to continue to operate until a date provided by the commission that provides facility operators a reasonable amount of time to comply with the amended permit. Each authorization to use a standard permit issued under this section is subject to review at least once every six years to determine whether the authority to operate the facility authorized by the permit SECTION 3. (a) Not later than March 1, 2026, the Texas Commission on Environmental Quality shall adopt rules necessary to implement the changes in law made by this Act. (b) After the effective date of this Act, notwithstanding the changes in law made by this Act, the Texas Commission on Environmental Quality may allow the continuation of an authorization to use a permit issued before the effective date of this Act until the date the authorization would have been eligible for renewal under the law in effect immediately before the effective date of this Act, and the former law is continued in SECTION 4. This Act takes effect September 1, 2025.
Bill History
Bill filed: AN ACT relating to the renewal and review of standard permits for certain
Related Guides
Learn more about tracking Texas legislation and working with lobbyists.
How to Read & Track Texas Bills
Master bill numbering, understand legislative language, and learn effective tracking strategies.
Understanding Texas Legislative Deadlines
Navigate the 140-day session with critical calendar dates and filing deadlines.
How Laws Get Made in Texas
Follow a bill's journey from filing to the governor's desk through committees and floor votes.
When Should Your Business Hire a Lobbyist?
Discover the signs that your business needs professional advocacy at the Texas Capitol.