SB 3011

relating to the amendment of standard permits for certain concrete
BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF TEXAS:
SECTION 1.  Section 382.05195, Health and Safety Code, is
amended by adding Subsection (f-1) and amending Subsection (k) to
(f-1)  If the commission amends a standard permit issued
under this section that authorizes the operation of a permanent
concrete plant that performs wet batching, dry batching, or central
mixing, a facility authorized to operate under the former standard
permit shall comply with the amended standard permit beginning on
(1)  the date the facility's authorization to use the
(2)  the second anniversary of the effective date of
(k)  An application for an authorization to use [the issuance
of] a standard permit under this section for a concrete plant that
performs wet batching, dry batching, or central mixing, including a
permanent, temporary, or specialty concrete batch plant, as defined
by the commission, must include a plot plan that clearly shows:
(3)  all property lines, emission points, buildings,
tanks, and process vessels and other process equipment in the area
in which the facility will be located;
(4)  at least two benchmark locations in the area in
which the facility will be located; and
(5)  if the permit requires a distance, setback, or
buffer from other property or structures as a condition of the
permit, whether the required distance or setback will be met.
SECTION 2.  Section 382.05198, Health and Safety Code, is
amended by amending Subsection (c) and adding Subsection (d) to
(c)  An application for an authorization to use [the issuance
of] a standard permit under this section must include a plot plan
that meets the requirements of Section 382.05195(k).
(d)  If the commission amends the standard permit issued
under this section, a facility authorized to operate under the
former standard permit shall comply with the amended standard
permit beginning on the earlier of:
(1)  the date the facility's authorization to use the
(2)  the second anniversary of the effective date of
SECTION 3.  Notwithstanding the changes in law made by this
Act, the Texas Commission on Environmental Quality may allow a
facility authorized to use a standard permit issued under Section
382.05195 or 382.05198, Health and Safety Code, that was amended
before the effective date of this Act to continue to operate under
the former standard permit until the date the facility's
authorization is eligible for renewal.
SECTION 4.  This Act takes effect September 1, 2025.